Chapter 18 Managing System Hardware; Running The Compactflash Report - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

,Running the CompactFlash Report

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
In Device Manager, choose Physical > Inventory.
Step 2
You see a list like the one shown in
Figure 18-2
You see system attributes for multiple switches in
single switch in Device Manager, double click the graphic of the switch in the main screen.
Note To configure modules, see
Running the CompactFlash Report
,
In Cisco SAN-OS Release 3.1(2), you can run the CompactFlash Check Utility to automatically scan
your fabric and generate a report that shows the status of CompactFlash on the following modules:
•
•
•
•
•
•
The CompactFlash report can be used on switches running Cisco SAN-OS Release 2.x or later. Before
running the CompactFlash report, you must complete the following tasks:
•
•
•
Cisco MDS 9000 Family CLI Configuration Guide
18-2
Device Manager Hardware Inventory
Chapter 19, "Managing Modules."
DS-X9016
DS-X9032
DS-X9302-14K9
DS-X9308-SMIP
DS-X9304-SMIP
DS-X9530-SF1-K9
Upgrade to Cisco Fabric Manager Release 3.1(2).
Download the CompactFlash Check Utility (m9000-lc1-gplug-mz.1.0.2.bin).
Run the CompactFlash report.
Figure 18-2.
Figure 18-1
Chapter 18 Managing System Hardware
and Figure 18-2. To see attributes for a
OL-16184-01, Cisco MDS SAN-OS Release 3.x