12.19
Using the authentication unit
Settings
[Operation Settings]
12.19.2 Authenticating in the LDAP server using the authentication card (LDAP-IC
Card Authentication)
Overview
You can configure settings so that authentication is performed in the LDAP server using the card ID registered
in the authentication card (LDAP-IC Card Authentication).
Authentication is completed only by placing the IC card. This enhances security without damaging users'
ability to easily operate the machine.
To perform authentication using the authentication card, follow the below procedure to configure the set-
tings.
1
Enable the use of Authentication Unit (IC card type) in this machine
% Authentication Unit (IC card type) must be configured by your service representative. For details,
contact your service representative.
2
Configure basic settings for the LDAP-IC card authentication
3
Set the following options according to your environment
Purpose
Communicate with the LDAP server using SSL
Configuring basic settings for the LDAP-IC card authentication
1
In the administrator mode, select [User Auth/Account Track] - [LDAP-IC Card Authentication Setting] -
[LDAP-IC Card Authentication Setting], set [LDAP-IC Card Authentication Setting] to [ON] (Default:
[OFF]).
bizhub C754/C654
Description
Select how to log in to this machine.
•
[1-to-many authentication]: Simply place his or her finger to log in.
•
[1-to-1 authentication]: Enter the user name and place his or her finger
to log in. Bio information is used instead of the password.
[1-to-many authentication] is specified by default.
12
Reference
page 12-67
12-64