[Ip Filtering (Permit Access)]; [Ip Filtering (Deny Access)]; [Raw Port Number]; [Llmnr Setting] - Konica Minolta bizhub C754 User Manual

Pressing [Communication Error Log] displays a list of IP addresses at which a communication error occurred,
error details, and occurrence times. To confirm the details, select a target communication error, then press
[Details].

[IP Filtering (Permit Access)]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IP Filtering (Permit Ac-
cess)]
Specify an IP address of a computer to which you want to allow access to this machine.
Settings
[Enable]/[Disable]
[Set 1] to [Set 5]

[IP Filtering (Deny Access)]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IP Filtering (Deny Ac-
cess)]
Specify an IP address of a computer to which you want to deny access to this machine.
Settings
[Enable]/[Disable]
[Set 1] to [Set 5]

[RAW Port Number]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [RAW Port Number]
Specify a RAW port number required for Port9100 printing.
Item
[Port 1] to [Port 6]

[LLMNR Setting]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [LLMNR Setting]
Select whether to use LLMNR (Link-local Multicast Name Resolution).
Using LLMNR enables you to resolve the name even in an environment with no DNS server. This function is
supported in an operating system of Windows Vista or later (Windows Vista/7/Server 2008/Server 2008 R2).
It is useful to resolve the name in the IPv6 environment.
[Disable] is specified by default.
bizhub C754/C654
Description
Select whether to specify an IP address that allows access to this machine.
[Disable] is specified by default.
Enter the range of IP addresses that allow access using the following for-
mat.
• Entry example: "192.168.1.1 - 192.168.1.10"
• If a single IP address is allowed to access, you can only enter the ad-
dress in one side of the range.
Description
Select whether to specify an IP address that denies access to this ma-
chine.
[Disable] is specified by default.
Enter the range of IP addresses that deny access using the following for-
mat.
• Entry example: "192.168.1.1 - 192.168.1.10"
• If a single IP address is allowed to access, you can only enter the ad-
dress in one side of the range.
Description
If necessary, change the RAW port number. When not using a port, select
[OFF].
The following shows the default settings.
• [Port 1]: 9100
• [Port 2]: 9112
• [Port 3]: 9113
• [Port 4]: 9114
• [Port 5]: 9115
• [Port 6]: 9116
17
17-9