Konica Minolta bizhub C754 User Manual page 212

12.6 Employing the LDAP authentication
Settings
[When Number of Jobs
Reach Maximum]
3
If you select [ON (MFP + External Server)] in Step 2, select [User Auth/Account Track] - [External Server
Settings] - [Temporarily Save Authentication Information] in the administrator mode, and configure the
following settings.
Settings
[Temporarily Save Authen-
tication Information]
[Reconnection Settings]
bizhub C754/C654
Description
Sets the maximum number of sheets that each user can print. Here, select
an operation if the number of sheets exceeds the maximum number of
sheets that can be printed.
• [Skip Job]: Stops the job currently running, and starts printing the next
job.
• [Stop Job]: Stops all jobs.
[Skip Job] is specified by default.
Description
To temporarily save authentication information in the main unit against a
case where an external authentication server shuts down, select [Enable].
[Disable] is specified by default.
If necessary, change the time to reconnect to the authentication server.
• [Reconnect for every login]: Connects to the authentication server at
the time authentication is carried out on this machine. If the authentica-
tion server is in the shutdown state at the time authentication is carried
out on this machine, first confirm that the authentication server is down,
and use the temporarily saved authentication information to log in to
this machine.
• [Set Reconnect Interval]: Connect to the authentication server at the
time specified in [Reconnection Time], and check the status of the au-
thentication server. If the authentication server is in the shutdown state,
use the authentication information temporarily saved in the main unit to
log in.
[Set Reconnect Interval] is specified by default.
12
12-27