How To Search Ldap Server - Konica Minolta bizhub 266 User Manual

5.10 Select the destination from the address book
5.10.2

How to search LDAP server

1
Press the Scan key.
The machine switches to the scan mode.
2
Press the AddressBook key.
3
Use the +/, key to select [LDAP SEARCH], then press the OK key.
4
Select [NAME] or [E-MAIL], then press the OK key.
5
Enter some of the characters contained in the registered name or address.
% You can enter up to 10 characters for a search.
6
Press the OK key.
The corresponding name or address of the destination will be displayed.
% Use the +/, key to select a name, then press the ) key. Then the name and E-mail address are
displayed.
% Use the +/, key to select E-mail address, then press the OK key. The name and E-mail address
appear.
7
Press the OK key.
The E-mail address of the destination will be set on the Scan screen.
% Pressing the , key enables to change the subject, cc address, file format, etc. For details, refer to
page 5-8.
% If the searched E-mail address contains more than 64 characters, the screen returns to the address
registration screen.
8
Press the Start key.
Sending starts.
bizhub 306/266
5
5-21