Configuring The Ws Scan Environment; Overview; Configuring The Basic Settings For The Ws Scan Transmission - Konica Minolta bizhub C754 User Manual

7.5

Configuring the WS scan environment

7.5 Configuring the WS scan environment

Overview

The WS scan transmission is a function that transmits original data scanned on this machine to the computer
on the network on the computer loaded with Windows Vista or later (Windows Vista/7/Server 2008/Server
2008 R2).
The computer uses the Web service function of Windows to automatically detect this machine connected to
the network and smoothly install this function as a Web service scanner.
HTTP is used for communication between this machine and the computer. Use SSL to encrypt a communi-
cation between the this machine and the computer; you can send a file more securely.
When using the WS scan transmission, follow the below procedure to configure the settings.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 2-2.
2
Configure the basic settings for the WS scan transmission
% For details on configuring the setting, refer to page 7-22.
3
Set the following options according to your environment
Purpose
WS scan using the discovery proxy
Communicate with the computer using SSL
d
Reference
For details on how to configure settings in the computer side, refer to [User's Guide: Scan Operations].

Configuring the basic settings for the WS scan transmission

Enable the scan using the Web service. In addition, configure settings used to detect this machine using the
Web service, information for this machine as a scanner, and the method to connect to this machine.
1
In the administrator mode, select [Network] - [DPWS Settings] - [DPWS Common Settings], then con-
figure the following settings.
bizhub C754/C654
7
Reference
page 7-23
page 7-24
7-22