Konica Minolta bizhub C754 User Manual page 138

9.3 Specifying useful transmission and reception functions
Settings
[Fax Forwarding Settings]
[Output Method]
[Forward Dest.]
[Line Setting]
[File Format]
[Page Setting]
[E-mail Attachment Meth-
od]
bizhub C754/C654
Description
Select [ON] to use the Forward TX function.
[OFF] is specified by default.
Select whether to print a received fax on this machine when forwarding it.
• [Forward & Print]: A received fax is forwarded and printed on this ma-
chine.
• [Forward & Print (If TX Fails)]: A received fax is printed on this machine
if forwarding fails.
[Forward & Print] is specified by default.
Specify a forwarding destination for a received fax.
• [Select from Address]: Forwards a fax to a destination registered in the
address book on this machine.
• [Select from Group]: Forwards a fax to a group registered on this ma-
chine.
• [Direct Input]: Forwards a fax to the fax number you enter.
If two lines are used, select the line used to send a fax. If [No Selection] is
selected, either line, whichever is not busy, is used for transmission.
[No Selection] is specified by default.
Select a file type to forward a fax.
You can convert a fax into a file except when the destination is a fax.
[PDF] is specified by default.
Select a filing page unit when an original consists of multiple pages.
• [Multi Page]: Select this check box to convert all pages to a single file.
• [Page Separation]: Select this check box to convert each page to a sep-
arate file. However, if [File Format] is set to [JPEG], you cannot select
[Page Separation].
[Multi Page] is specified by default.
You can select the E-mail attachment method when the forward destina-
tion is an E-mail address and [Page Setting] is set to [Page Separation].
• [All Files Sent as one (1) E-mail]: Attaches all files to one E-mail.
• [One (1) File per E-Mail]: Sends one E-mail for each file.
[All Files Sent as one (1) E-mail] is specified by default.
9
9-13