7.6
Configuring the TWAIN scan environment
7.6
Configuring the TWAIN scan environment
Overview
Using the TWAIN driver enables you to use this machine as a scanner by controlling it from a computer con-
nected to the network.
When using the TWAIN scan, follow the below procedure to configure the settings.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 2-2.
2
Configure the basic settings for the TWAIN scan
% For details on configuring the setting, refer to page 7-26.
3
If necessary, configure the following options.
Purpose
Change the time for locking the Control Panel while the TWAIN scan is running.
Configuring the basic settings for the TWAIN scan
On the computer on the network, configure settings necessary for controlling this machine.
1
In the administrator mode, select [Network] - [TCP/IP Setting] - [TCP/IP Setting], and set [SLP] to [En-
able] (Default: [Enable]).
bizhub C754/C654
7
Reference
page 7-27
7-26