[E-Mail Settings]; [E-Mail Tx (Smtp)] - Konica Minolta bizhub C754 User Manual

Settings
[Default Search Result Dis-
play Setting]

[E-Mail Settings]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [E-Mail Settings]
Configure the settings to send and receive E-mails on this machine.
Settings

[E-Mail TX (SMTP)]

[E-Mail RX (POP)]
[S/MIME Communication
Settings]
[E-Mail TX (SMTP)]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [E-Mail Settings] - [E-Mail TX (SMTP)]
Configure the settings to send an E-mail from this machine.
Settings
[ON]/[OFF]
[Scan to E-mail]
[Status Notification]
[Total Counter Notification]
[SMTP Server Address]
[Binary Division]
[Divided Mail Size]
[Connection Timeout]
[Server Capacity]
[SSL/TLS Settings]
bizhub C754/C654
Description
Select the default destination type to be displayed as the destination
search result.
[E-Mail] is specified by default.
Description
Configure the settings to send an E-mail from this machine.
Configure the settings to enable this machine to receive an E-mail.
Configure settings to enable use of S/MIME on this machine. This function
enables E-mail encryption and addition of a digital signature, and enhanc-
es E-mail security.
Description
Select whether to send an E-mail from this machine.
[ON] is specified by default.
Select whether to use the E-mail transmission function.
Using this function allows you to send the scanned original data as an E-
mail attachment.
[ON] is specified by default.
Select whether to use the E-mail notification function.
If a warning such as paper addition, toner replacement, or paper jam oc-
curs on this machine, it can be sent to a registered E-mail address.
[ON] is specified by default.
Select whether to use the total counter notification function.
Using this function allows you to send counter information managed by
this machine to the registered E-mail address.
[ON] is specified by default.
Enter the address of your E-mail server (SMTP).
Use one of the following entry formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Select whether to divide a large E-mail before sending it. Using this func-
tion divides an E-mail based on the setting of [Divided Mail Size].
This item is necessary if the maximum capacity of an E-mail to be sent is
restricted in the E-mail server.
[OFF] is specified by default.
Enter the size to divide an E-mail when selecting [ON] for [Binary Division].
Change the timeout period for a communication with the E-mail server
(SMTP), as required.
[60] is specified by default.
Enter the maximum E-mail size that is available in the E-mail server (SMTP).
Press [No Limit] to clear the selection, and enter the size.
E-mails exceeding the specified size are discarded.
This setting is disabled when [ON] is selected in [Binary Division].
[No Limit] is specified by default.
Select the method to encrypt communications with the E-mail server
(SMTP).
Select [SMTP over SSL] or [Start TLS] according to your environment.
[OFF] is specified by default.
17
17-17