Configuring Network Environment Settings; Overview; Assigning An Ip Address - Konica Minolta bizhub C754 User Manual

2.1

Configuring network environment settings

2 Operations Required to Use Web Connection
2.1 Configuring network environment settings

Overview

To connect this machine to the network (TCP/IP), follow the procedure below to configure settings.
1
Assigning an IP address to this machine
% If this machine has a fixed IP address, enter the IP address, subnet mask, and default gateway. For
details, refer to page 2-2.
% To automatically obtain the IP address of this machine using DHCP, enable the Auto Input function
for automatically obtaining an IP address from DHCP (default: enabled). For details, refer to
page 2-2.
% For details on how to use this machine in the IPv6 environment, refer to page 5-7.
2
Confirming the IP address assigned to this machine
% When you access Web Connection, you need the IP address of this machine. For the IP address
confirmation procedure, refer to page 2-3.
NOTICE
To enable changed network settings, turn the main power of this machine off and on again. When restarting
this machine, turn the main power off and on again after 10 or more seconds have passed. Not doing so may
result in an operation failure.

Assigning an IP address

If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel, press [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPv4
Settings], then configure the following setting.
Settings
[IP Application Method]
[IP Address]
[Subnet Mask]
[Default Gateway]
bizhub C754/C654
Description
To manually enter the IP address, select [Manual Input].
To automatically obtain the IP address using DHCP, select [Auto Input],
then specify the auto input method.
[Auto Input] is specified by default.
Enter the fixed IP address assigned to the machine.
Enter the subnet mask.
Enter the default gateway.
2
2-2