Specifying Useful Transmission And Reception Functions; Enabling/Disabling The Fax Functions - Konica Minolta bizhub C754 User Manual

9.3

Specifying useful transmission and reception functions

9.3 Specifying useful transmission and reception functions
9.3.1

Enabling/disabling the fax functions

Enable or disable fax transmission and reception functions, such as Confirm Address that prevents wrong
fax transmission, F-Code TX, and Relay RX.
In the administrator mode, select [Fax Settings] - [Function Setting] - [Function ON/OFF Setting], then con-
figure the following settings.
Settings
[F-Code TX]
[Relay RX]
[Relay Printing]
[Destination Check Display
Function]
[Confirm Address (TX)]
bizhub C754/C654
Description
Select whether to use F-Code TX.
F-Code TX is a function that sends documents to a destination by entering
a SUB address and a sender ID (communication password) of a specific
user box. The remote machine must support the F-Code TX/RX. Faxing is
possible without specifying a sender ID (communication password). This
setting is used for Confidential Communication, Relay Distribution, or PC-
Fax RX.
[ON] is specified by default.
Select whether to use this machine as a fax relaying station.
If this machine is used as a relaying station, it is possible to receive a fax
from a remote machine and automatically relay it to multiple programmed
destinations.
[ON] is specified by default.
Select whether to distribute and print a received fax when this machine is
used as a fax relaying station.
[OFF] is specified by default.
Select whether to show a list of specified destinations before sending a fax.
Select [ON] if you want to check destinations before sending a fax. Using
this function helps to prevent wrong transmission or not forget sending of
a fax.
[OFF] is specified by default.
Select whether to require the user to enter a fax number twice to send a
fax by directly entering the fax number.
This is helpful to prevent a fax from being sent to an incorrect destination.
[OFF] is specified by default.
9
9-9