Konica Minolta bizhub C754 User Manual page 351

15.3 Registering a program
Settings
[Password TX]
[F-Code]
[Original Direction]
[2-Sided Binding Direction]
[Special Original]
[Skip Blank Page(s) During
Scan]
[Thin Paper Original]
[Book Original]
[Frame Erase]
[Compose(Date/Time)]
[Compose(Page)]
[Compose(Header/Footer)]
[Compose(Stamp)]
bizhub C754/C654
Description
To send fax with a password to a destination for which fax destinations are
restricted by passwords (Closed Network RX enabled), select [ON]. Also
enter the password.
[OFF] is specified by default.
Select [Enable] to enable F-Code TX. Also enter [SUB Address] and [Pass-
word].
[Disable] is specified by default.
When scanning a double-sided original, you can specify the original load-
ing direction so that the vertical direction is set correctly after scanning.
[Top] is specified by default.
Select the biding position of original when scanning both sides of the orig-
inal.
[Auto] is specified by default.
Select an original type when scanning special documents.
• [Same Width]/[Different Width]: Even for an original with pages of differ-
ent sizes, by using ADF, you can scan data while detecting the size for
each page.
• [Z-Folded Original]: Even folded originals, the original size can be de-
tected accurately.
• [Long Original]: Load the long original which cannot be placed on the
Original Glass and larger in the feeding direction than the full standard
size (11 e 17 or A3) on the ADF. There is no need of entering the original
size in advance but ADF will detect the size automatically.
[Normal] is specified by default.
When scanning an original that contains blank pages, select whether to ex-
clude blank pages from scanning.
[OFF] is specified by default.
Reduce the original feed speed of the ADF to prevent thin paper from pa-
per jam.
[OFF] is specified by default.
Select this option if you scan two-page spreads such as book and catalog
separately into the left and right pages, or scan a page spread as a single
page.
• [Method]: Select a method to scan two-page spreads from [Book
Spread], [Separation], [Front Cover], and [Font/Back Cover].
• [Center Erase]: Erases the shadow created in the center when the orig-
inal cover cannot be closed properly due to the thickness of the origi-
nal.
• [Bind Direction]: If [Separation], [Front Cover] or [Front/Back Cover] is
selected for [Method], select an output bind position of two-page
spreads to be scanned. Select [Left Bind] for originals of left binding,
and [Right Bind] for originals of right binding.
[OFF] (not selected) is specified by default.
Erases an area of an identical specified width along the four sides of an
original. You can erase the four sides of the original to different widths.
[OFF] (not selected) is specified by default.
Select this option to print on a specified page the date/time that the original
was scanned. You can select a print position in the page and format.
[OFF] (not selected) is specified by default.
Select this option to print all page numbers and chapter numbers. You can
select a print position and format.
[OFF] (not selected) is specified by default.
Select this option to print text or date/time on the top and bottom margins
in a specified page Select a content from previously registered ones.
[OFF] (not selected) is specified by default.
Select this check box to print a text such as "PLEASE REPLY" and "DO
NOT COPY" on the first page or all pages.
You can select the text to be printed from the registered fix stamps and ar-
bitrary registered stamps.
[OFF] (not selected) is specified by default.
15
15-24