Configuring The Smb Transmission Environment; Overview; Configuring Basic Settings For The Smb Transmission - Konica Minolta bizhub C754 User Manual

7.2

Configuring the SMB transmission environment

7.2 Configuring the SMB transmission environment

Overview

The SMB Send is a function that transmits original data scanned on this machine to a shared folder in a spec-
ified computer. The shared folder is shared using the SMB (Server Message Block) protocol.
If the WINS server is installed to resolve the name, register it.
Enabling the direct hosting SMB service allows communications using the IP address (IPv4/IPv6) or host
name. Enabling this service allows you to use the SMB Send function even in the IPv6 environment.
Using LLMNR (Link-local Multicast Name Resolution) enables you to resolve the name even in an environ-
ment with no DNS server. This function is supported in an operating system of Windows Vista or later (Win-
dows Vista/7/Server 2008/Server 2008 R2). It is useful to resolve the name in the IPv6 environment.
When using the SMB Send function, follow the below procedure to configure the settings.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 2-2.
2
Configure basic settings for the SMB transmission
% For details on configuring the setting, refer to page 7-12.
3
Set the following options according to your environment
Purpose
Resolve the name using the WINS server
Use the SMB Send function in the IPv6 environment
Specify a destination with a host name in an environment where the DNS server is
not running (supported in the computer loaded with Windows Vista or later)
Use the SMB Send function in the DFS environment
d
Reference
If user authentication by Active Directory is installed, the Scan to Home function is available, which you can
easily send data to a shared folder on the server or that on the login user's computer. For details, refer to
page 12-15.
If the user authentication is installed, using the user authentication information (login name and password) as
SMB destination authentication information (host name and password) avoids the problem of having to spec-
ify SMB destination authentication information, allowing construction of a single sign-on environment for
SMB transmission. For details, refer to page 12-39.

Configuring basic settings for the SMB transmission

Enable the SMB Send function. In addition, select the authentication method for SMB transmission.
In the administrator mode, select [Network] - [SMB Setting] - [Client Setting], then configure the following set-
tings.
bizhub C754/C654
7
Reference
page 7-13
page 7-14
page 7-14
page 7-15
7-12