Registering An Smb Program - Konica Minolta bizhub C754 User Manual

15.3 Registering a program
15.3.3

Registering an SMB program

A program can be registered or edited using Web Connection. Although character input is a difficult process
using the Touch Panel, it can be carried out easily if you use the computer.
A combination of address information and the fax/scan transmission option settings can be registered in a
program.
The following describes the SMB program.
In the administrator mode, select [Store Address] - [Program] - [Registration] - [SMB], then click [OK] to con-
figure the following settings.
Settings
[Name]
[Destination Information]
[Basic Setting]/[Application
Setting]
[Limiting Access to Desti-
nations]
bizhub C754/C654
Description
Enter the program name (using up to 24 characters).
Assign a name that helps you easily identify the program.
Click [Search from List], and select a destination SMB from the list. Click
[Check Destination] to check registered address books.
If you wish to manually enter a destination SMB, select [Direct Input] and
enter the SMB.
• [Host Address]: Select the [Please check to enter host name.] check
box, and enter the destination computer name (host name) or IP ad-
dress (using up to 253 characters).
• [File Path]: Enter the shared folder name of the computer specified in
[Host Address] (using up to 255 characters). The shared folder name is
generally referred to as a share name.
• [User ID]: Enter the name of a user who is authorized to access the fold-
er specified in [File Path] (using up to 64 characters).
• [Password]: Enter the password of the user specified in [User ID].
Only one destination can be specified.
To specify the host name, use uppercase letters.
Configure the Scan option settings.
For details, refer to page 15-22.
Limit access to this destination, if necessary.
For details, refer to page 12-44.
15
15-15