9.1
Configuring basic fax settings
Settings
[Line Monitor Sound Vol-
ume (Receive)]
9.1.2
Configuring connection settings for a PBX environment
You can connect this machine to a Private Branch Exchange (PBX) environment. Using PBX enables you to
connect multiple telephones and faxes of the organization to the public telephone network.
In the administrator mode, select [Fax Settings] - [PBX Connection Setting], then configure the following set-
tings.
Settings
[PBX Connection Setting]
[Outside Line]
9.1.3
Registering the sender information
Register the machine name, your company name (sender name), and the fax number that are to be printed
as sender information when faxes are transmitted.
TTI information is automatically added to a fax to be sent from this machine. Up to 20 sender names can be
registered. You can use different names for different purposes depending on the destination.
In the administrator mode, select [Fax Settings] - [Header Information], then configure the following settings.
bizhub C754/C654
Description
If necessary, adjust the volume of speakers when receiving a fax if [Line
Monitor Sound] is set to [ON].
[20] is specified by default.
Description
Select this item to use this machine in a PBX environment.
[OFF] (not selected) is specified by default.
Enter an outside line number (using up to four digits).
The outside line number specified here is added to fax numbers registered
with the address book or program.
9
9-3