Konica Minolta bizhub C754 User Manual page 347

15.3 Registering a program
In the administrator mode, select [Store Address] - [Program] - [Registration] - [IP Address Fax], then click
[OK] to configure the following settings.
Settings
[Name]
[Destination Informa-
tion]
[Basic Setting]/[Appli-
cation Setting]
[Limiting Access to
Destinations]
bizhub C754/C654
Description
Enter the program name (using up to 24 characters).
Assign a name that helps you easily identify the program.
Click [Search from List], and select a destination IP address fax from the list.
Click [Check Destination] to check registered address books.
If you wish to manually enter a destination IP address fax, select [Direct Input]
and enter the IP address fax.
• [Destination Type]: Select an address type of the destination.
• [Address]: Enters the destination IP address or host name. You can also
specify a destination by E-mail address. To specify a destination by E-mail
address, enter the destination IP address or host name following "ipaddr-
fax@".
To enter an IP address following the @ symbol, put the IP address in brack-
ets "[ ]".
Example of IP address (IPv4) entry: "ipaddrfax@[192.168.1.1]"To enter an
IP address (IPv6), enter "IPv6:" following left bracket "[ ".
Example of IP address (IPv6) entry: "ipaddr-
fax@[IPv6:fe80::220:6bff:fe10:2f16]"To enter a host name following the @
symbol, brackets "[ ]" are unnecessary.
Example of host name entry: "ipaddrfax@host.example.com"
• [Port No.]: If necessary, change the port number. Normally, you can use the
original port number.
• [Destination Machine Type]: Select whether the recipient machine sup-
ports color print.
Configure the Scan option settings. For details, refer to page 15-22.
Limit access to this destination, if necessary.
For details, refer to page 12-44.
15
15-20