Encrypting Communication Using Web Connection - Konica Minolta bizhub C754 User Manual

6.1

Encrypting communication using Web Connection

6 Setting up the Operating Environment of Web Con-
nection
6.1 Encrypting communication using Web Connection
You can enhance security by encrypting communication between the computer and Web Connection with
SSL.
The SSL certificate is registered on this machine when it is shipped. Therefore, only enabling SSL/TLS on this
machine allows SSL encrypted communication immediately after the setup.
In the administrator mode, select [Security] - [PKI Settings] - [SSL Setting], then configure the following set-
tings.
Settings
[Mode using SSL/TLS]
[Encryption Strength]
Tips
- When Internet Explorer is used in Windows XP/Server 2003, an SSL communication (https connection)
is disabled if the encryption strength is set to [AES-256].
d
Reference
You can create a new certificate without using the certificate registered when it is shipped. For details, refer
to page 13-2.
bizhub C754/C654
Description
Select a mode to perform SSL communication.
• [Admin. Mode]: Uses SSL communication in the administrator mode
only.
• [Admin. Mode and User Mode]: Uses SSL communication in both the
administrator mode and user mode.
• [None]: Does not use SSL communication.
[None] is specified by default.
Select the SSL encryption strength.
Select it according to your environment.
[AES-256, 3DES-168, RC4-128, DES-56, RC4-40] is specified by default.
6
6-2