Konica Minolta bizhub C754 User Manual page 85

7.5 Configuring the WS scan environment
To make SSL communications, enable SSL. In addition, specify how to verify the certificate.
In the administrator mode, select [Network] - [DPWS Settings] - [DPWS Common Settings], then configure
the following settings.
Settings
[SSL Setting]
[Certificate Verification
Level Settings]
[Validity Period]
[Key Usage]
[Chain]
[Expiration Date Con-
firmation]
d
Reference
In the administrator mode, select [Security] - [Certificate Verification Settings], then configure whether to ver-
ify the certificate. The certificate is verified by default. For details, refer to page 13-9.
bizhub C754/C654
Description
Select [ON] to make SSL communications.
[OFF] is specified by default.
To verify the certificate, select items to be verified.
If you select [Confirm] at each item, the certificate is verified for each item.
Confirm whether the certificate is still valid.
[Confirm] is specified by default.
Confirm whether the certificate is used according to the intended purpose
approved by the certificate issuer.
[Do Not Confirm] is specified by default.
Confirm whether there is a problem in the certificate chain (certificate path).
The chain is validated by referencing the external certificates managed on
this machine.
[Do Not Confirm] is specified by default.
Confirm whether the certificate has expired.
Confirm for expiration of the certificate in the following order.
• OCSP (Online Certificate Status Protocol) service
• CRL (Certificate Revocation List)
[Do Not Confirm] is specified by default.
7
7-25