Konica Minolta bizhub C754 User Manual page 164

10.2 Configuring the IP address fax environment
Settings
[SMTP RX]
[Port Number]
[Connection Timeout]
4
In the administrator mode, select [Fax Settings] - [Header Information], then configure the following set-
tings.
Settings
[Line 1], [Line 2]
[Sender Name]
[Edit]
[No.]
[Sender Name]
[Delete]
5
In the administrator mode, select [Fax Settings] - [Network Fax Setting] - [IP Address Fax Operation Set-
tings], then configure the following settings.
bizhub C754/C654
Description
Select [ON] to use the IP address fax function.
[ON] is specified by default.
If necessary, change the port number of the E-mail server (SMTP).
Normally, you can use the original port number.
[25] is specified by default.
Change the timeout period for a communication with the E-mail server
(SMTP), as required.
[300] sec. is specified by default.
Description
Select the default setting for the sender name.
The sender name, which is specified by default, is automatically added
when a fax is sent.
Displays registered sender names.
You can register up to 20 sender names.
Use this option to use different sender names depending on the destina-
tion.
Displays the registration number.
Enter a sender name (using up to 30 characters).
Click this button to delete the registered sender name.
10
10-18