Configuring The Ftp Transmission Environment; Overview; Configuring Basic Settings For The Ftp Transmission; Using The Proxy Server - Konica Minolta bizhub C754 User Manual

7.3

Configuring the FTP transmission environment

7.3 Configuring the FTP transmission environment

Overview

The FTP transmission is a function that transmits original data scanned on this machine to a specified folder
in the FTP server.
When the proxy server is used, you can configure settings so that the FTP server is accessed via the proxy
server.
When using the FTP transmission, follow the below procedure to configure the settings.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 2-2.
2
Configure basic settings for the FTP transmission
% For details on configuring the setting, refer to page 7-16.
3
Set the following options according to your environment
Purpose
Send files to the FTP server via the proxy server

Configuring basic settings for the FTP transmission

Enable the FTP transmission. In addition, configure settings for connecting to the FTP server.
In the administrator mode, select [Network] - [FTP Setting] - [FTP TX Setting], then configure the following
settings.
Settings
[FTP TX]
[Connection Timeout]
[Port Number]

Using the proxy server

When the proxy server is used in your network environment, you can configure settings so that the FTP server
is accessed via the proxy server.
To use the proxy server, register the proxy server information on this machine.
bizhub C754/C654
Description
Select [ON] to use the FTP transmission function.
[ON] is specified by default.
If necessary, change the time-out time to limit a communication with the
FTP server.
[60] sec. is specified by default.
If necessary, change the FTP server port number.
Normally, you can use the original port number.
[21] is specified by default.
7
Reference
page 7-16
7-16