10
Specifying use of registered user authentication information to log on to
the LDAP server (mode 466)
Specify whether or not user names and passwords registered with user
authentication are used to log on to the LDAP server.
Factory settings
Bit
Setting
Specifying settings
The shaded cells indicate the settings selected during production.
Bit
7
6, 5, 4, 3,
2, 1, 0
!
Detail
The information for the LDAP server to be connected to must be
registered in order to use the LDAP server. In addition, when LDAP and
user authentication are synchronized, select "Active Directory" as the
user authentication method. Select "GSS-SPNEGO" as the LDAP
authentication method. For details on the user authentication method,
refer to the User manual [Copy Operations]. For details on the LDAP
authentication method, refer to "LDAP Setting" on page 3-44 or "LDAP
(Administrator mode)" on page 9-70.
10-50
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description
Specifies whether or not the
user name/password used
for external server authenti-
cation is used to log on to
the LDAP server.
-----------------------------
Specifying management settings
Setting
Description
0
Not used for logon
1
Used for logon
0000000
*Do not change these bits
when specifying settings for
this function.
bizhub 350/250 (Phase 2.5)
Page
Refer-
ence
---------
---------