14.10.3 Configuring The Default Method To Display Destinations - Konica Minolta bizhub C754 User Manual

14.10 Setting the operating environment for this machine
Settings
[Enlarge Display Setting]
[Apply Basic Setting to En-
large Display]

14.10.3 Configuring the default method to display destinations

Configure the default method to display destinations in the fax/scan mode.
In the administrator mode, select [System Settings] - [Default Address Display Settings], and configure the
following settings.
Settings
[Default Address Sort
Method]
bizhub C754/C654
Description
If you have set [Default Enlarge Display Setting] to [ON], select whether to
enable Enlarge Display mode when Reset is pressed.
If you wish to enable Enlarge Display mode when Reset is pressed, select
[Enlarge].
[Normal] is specified by default.
Select whether to inherit the settings configured on the normal screen dis-
play when switching the screen from Normal to Enlarge Display.
• [Mode 1]: Inherit all normal mode settings.
• [Mode 2]: In Copy mode, only inherit Normal mode settings that can be
set in Enlarge Display mode. In Fax/Scan mode, reset the settings.
[Mode 2] is specified by default.
Description
Select the list order of destinations by registration number and registration
name.
If you select the registration name, destinations are sorted according to
[Sort Character] specified for the destinations.
[Registered No.] is specified by default.
14
14-36