[Status Notification Setting]; [Total Counter Notification Settings] - Konica Minolta bizhub C754 User Manual

Settings
[Port Number]
[Set Date]
[Auto Time Adjustment]
[Polling Interval]

[Status Notification Setting]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings] - [Status Notification Set-
ting]
Configure the setting for notifying to the registered E-mail address when a warning such as for toner replace-
ment or a paper jam occurs on this machine.
Settings
[Register Notification Ad-
dress]
[IP Address 1] to [IP
Address 5]
[IPX Address]
[E-mail 1] to [E-mail
10]

[Total Counter Notification Settings]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings] - [Total Counter Notifica-
tion Settings]
Configure the setting for sending counter information managed by this machine to a registered E-mail ad-
dress.
bizhub C754/C654
Description
If necessary, change the NTP server port number.
Normally, you can use the original port number.
[123] is specified by default.
Connect to the NTP server, and adjust the date and time of this machine.
Select whether to automatically adjust the date and time by connecting to
the NTP server at periodical intervals.
[Off] is specified by default.
If you select [On] for [Auto Time Adjustment], specify an interval to auto-
matically adjust the date and time.
[24 hours] is specified by default.
Description
Register an address where to notify a warning that occurred on this ma-
chine.
Select this item when specifying a notification destination with an IP ad-
dress or host name.
• [Address]: Enter the address of the destination in any of the following
formats.
Example of host name entry: "host.example.com"
Example of IP address (IPv4) entry: "192.168.1.1"
Example of IP address (IPv6) entry: "fe80::220:6b.:fe10:2f16"
• [Port Number]: If necessary, change the port number. [162] is specified
by default.
• [Community Name]: Enter the community name (using up to 15 charac-
ters). [public] is specified by default.
• [Notification Items]: Select an item to be notified automatically. Set an
item to be notified to [ON].
Select this item when specifying a notification destination with an IPX ad-
dress.
• [Address]: Enter the network address and node address of the destina-
tion.
[Network Address]: Enter the network address using eight hexadecimal
characters.
[Node Address]: Enter the node address using 12 hexadecimal charac-
ters.
• [Community Name]: Enter the community name (using up to 15 charac-
ters). [public] is specified by default.
• [Notification Items]: Select an item to be notified automatically. Set an
item to be notified to [ON].
Select this item when specifying a notification destination with an E-mail
address.
• [Edit E-Mail Address]: Enter the destination E-mail address.
• [Notification Items]: Select an item to be notified automatically. Set an
item to be notified to [ON].
17
17-29