Konica Minolta bizhub C754 User Manual page 299

14.4 Notifying of the machine status via E-mail
Settings
[PM Call]
[Replace Staples]
[Replenish Toner]
[Finisher Tray Full]
[Service Call]
[Job Finished]
[Hole-Punch Scrap Box
Full]
[Waste Toner Box Full]
[Imaging Unit Yield]
[Fusing Unit Yield]
[Transfer Roller Yield]
[Transfer Belt Unit Yield]
[Ozone Filter Yield]
bizhub C754/C654
Description
Select this check box to send a notification when periodic inspection is re-
quired.
Select this check box to send a notification when staples run out.
Select this check box to send a notification when toner runs out.
Select this check box to send a notification when the finisher tray is full.
Select this check box to send a notification when a service call occurs.
Select this check box to send a notification when a job is completed.
Select this check box to send a notification when hole-punch scrap must
be removed.
Select this check box to send a notification when the waste toner box must
be replaced.
Select this check box to send a notification when the imaging unit must be
replaced.
Select this check box to send a notification when the finishing unit must be
replaced.
Select this check box to send a notification when the transfer roller unit
must be replaced.
Select this check box to send a notification when the transfer belt unit must
be replaced.
Select this check box to send a notification when the ozone filter needs to
be replaced.
14
14-19