Checking A Fax Reception - Konica Minolta bizhub C754 User Manual

10.1 Configuring the Internet fax environment
Settings
[Check for New Messages]

Checking a fax reception

Configure the settings for requesting or responding the Internet fax transmission result, and the setting re-
garding the exchange of capability information between machines.
In the administrator mode, select [Fax Settings] - [Network Fax Setting] - [I-Fax Advanced Setting], then con-
figure the following settings.
Settings
[MDN Request]
[DSN Request]
[MDN Response]
[MDN/DSN Response
Monitoring Setting]
[Maximum Resolution]
bizhub C754/C654
Description
Select this check box to check for incoming faxes by periodically connect-
ing to the E-mail server (POP) on this machine. Also, enter an interval for
connecting the E-mail server (POP) at [Polling Interval].
[ON] (selected) is specified by default.
Description
Select whether to request for fax reception result (MDN request) to the des-
tination.
If a MDN request is sent, the recipient machine returns a response mes-
sage upon reception of a fax, so that you can check that the fax is success-
fully received by the destination.
Also, by receiving a response message from the destination, you can ob-
tain the reception capability information of the destination. When new re-
sponse message is received from a destination registered in the address
book, the capability information is overwritten with new one.
[ON] is specified by default.
Select whether to request for fax reception result (DSN request) to the des-
tination mail server.
If you select [ON] for [MDN Request], priority is given to the MDN request.
[OFF] is specified by default.
Select whether to return a response message when a sender requests for
fax reception result (MDN request).
[ON] is specified by default.
Select this check box to specify the waiting time for a response from the
destination after a MDN request or DSN request is sent by this machine.
If necessary, change the waiting time for a response from the destination
at [Monitoring Time]. If a response message is received after the specified
waiting time, the machine ignores the message.
[24] hours is specified by default.
If necessary, switch the maximum resolution that this machine can sup-
port.
[Ultra Fine] is specified by default.
10
10-7