Controlling The Access To This Machine By Ip Address - Konica Minolta bizhub C754 User Manual

13.5

Controlling the access to this machine by IP address

13.5 Controlling the access to this machine by IP address
The computers' access to this machine can be controlled via IP address. This is called "IP address filtering".
You can specify both IP addresses that are allowed to access this machine and those refused to access the
machine.
Tips
- IP address filtering is not supported in the IPv6 environment.
In the administrator mode, select [Network] - [TCP/IP Setting] - [IP Filtering], then configure the following set-
tings.
Settings
[Permit Access]
[Deny Access]
bizhub C754/C654
Description
Select [Enable] to specify IP addresses allowed to access. Also enter the
range of IP addresses allowed to access.
If a single IP address is allowed to access, you can only enter the address
in one side of the range.
• Example of entry: "192.168.1.1"
[Disable] is specified by default.
Select [Enable] to specify IP addresses refused to access. Also enter the
range of IP addresses.
If a single IP address is refused to access, you can only enter the address
in one side of the range.
• Example of entry: "192.168.1.1"
[Disable] is specified by default.
13
13-14