Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
N o t e
16-92
Mobile VPN Peer Settings (Client-to-site VPN Only)
In a client-to-site VPN, mobile users may tunnel into the VPN using many
different private connections. Therefore, they may have IP addresses in many
different networks. In order to allow a mobile user to access the VPN, the
ProCurve Secure Router must first assign it an IP address on a local private
network.
Figure 16-72. Configuring an IKE Mode Config Pool for Mobile VPN Peers
Enter the network from which the router should assign remote clients
addresses in the IP Address fields.
The private network for remote users should be different from that for
local users.
You can optionally configure IP addresses for up to two DNS servers and up
to two WINS servers. These servers will resolve hostnames to IP addresses
for the clients. Enter the address for the server in the field to the right of its
name. For example, in Figure 16-72, the administrator has entered the address
of a local DNS and WINS server in the Primary DNS Server and Primary
WINS Server fields.