Density Adjustment - Kyocera Mita KM-3050 Advanced Operation Manual

Copying Functions

Density Adjustment

1-44
Copy density is adjustable.
The table below shows the available settings.
Mode
Manual
Auto
NOTE:
You may choose Auto mode as the default setting (refer to
Density on page 6-26).
Follow the steps as below for density adjustment.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Image Quality] and then [Density].
4
To adjust density manually, press [-3] - [+3] (Lighter - Darker).
You can change the density level [-3] - [+3] (Lighter - Darker) by half a step.
To change density
automatically, press
[Auto].
5
Press [OK].
6
Press the Start key to start copying.
Description
Density is adjustable to either 7 or 13 different
levels.
Optimum density is selected depending on
density of original.
Ready to copy.
Density
Auto
Press [OK] to display
Lighter
the image.
-3 -2
-2.5 -1.5
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Copies
Darker
Normal
-1 0 +1 +2 +3
-0.5 +0.5 +1.5 +2.5
Cancel OK
10/5/2006 10:10
1