Device/Communication - Kyocera Mita KM-3050 Advanced Operation Manual

Device/Communication

Displaying Device/Communication Screen
Check of Device Status
ADVANCED OPERATION GUIDE
Configure the devices/lines installed or connected to this machine or check
their status. You can also control devices depending on their status.
The procedure for using the Device/Communication screen is explained
below.
1
Press the Status/Job Cancel key.
2
Press [Device/Communication]
The screen to check the status or configure the devices is displayed.
The items you can check are described below.
Scanner
The status of an original scanning in the document processor (optional) or
the error information (paper jam, opened cover, etc.) is displayed.
Printer
Error information such as paper jam, out of toner, or out of paper, and
status such as waiting or printing are displayed.
Hard Disk
The information such as formatting, overwriting for erasure, and error
occurrence is displayed.
FAX Backup Memory
Usage and capacity of the optional data backup kit are displayed.
Detail
Scanner
Ready.
Printer
Ready.
Removable Memory
Safely removable.
Format Remove
FAX Port 1
Communicating...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs Storing Jobs
Log Executing TX job **.
Status / Job Cancel
Hard Disk
Error has occurred.
FAX Backup Memory
Not connected.
Memory Card
Not connected.
Display
Format Printing list
Error
Device/
Paper/Supplies
Communication
10/5/2006 10:10
5-17