Table of Contents
Advertisement
System Menu
Output Tray
6-20
Select output tray respectively for copy jobs, print jobs from Custom Box,
computers, and FAX RX data. The options are as follows.
Output Tray
Top Tray
Finisher Tray
Tray A, Tray B*, Tray C*
Job Separator
Tray 1-7 *
*
Select [Face Up] (print surface up) or [Face Down] (print surface
down) for paper orientation at output.
NOTE:
Optional job separator, document finisher, 3000 sheet document
finisher, and Mailbox are required.
FAX RX data output can be specified when the optional fax kit is installed.
Use the procedure below to select the output tray.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Output Tray.
3
Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
NOTE:
FAX Port 1 appears when the optional fax kit is installed. If you
have 2 optional fax kits installed, Fax Port 2 appears. You can specify the
output tray for the second kit (Dual FAX).
Descriptions
Delivery on Top Tray of the machine.
Delivery on Tray set to the optional
document finisher or built-in finisher.
Delivery on Tray A-C of the optional 3000
sheet document finisher.
Delivery on the optional job separator.
Delivery on Tray 1-7 (1: uppermost) of the
optional Mailbox.
ADVANCED OPERATION GUIDE
Advertisement
Table of Contents
