Duplex Mode; The Start Key - Kyocera Mita KM-3050 Advanced Operation Manual

Copying Functions
1-36
3
Select the desired

Duplex mode.

4
If you choose [1 sided >> 2 sided], [2 sided >> 2 sided] or [Book >> 2
sided], select the binding edge of the finished copies in Finishing.
5
If you choose [2
sided >> 2 sided], [2
sided >> 1 sided],
[Book >> 1 sided] or
[Book >> 2 sided],
select the binding
edge of the originals
in Original.
6
Press [Original Orientation] to select orientation of the originals, either [Top
Edge Top] or [Top Edge Left]. Then press [OK].
7
Press [OK].
8
Place the originals in the document processor or on the platen and press

the Start key.

If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan Finish] to start copying.
Ready to copy.
Duplex
1-sided
>>1-sided
1-sided
Press [OK] to display
>>2-sided
the image.
2-sided
>>1-sided
2-sided
>>2-sided
Book
>>1-sided
Book
>>2-sided
Add Shortcut
Status
Ready to copy.
Duplex
1-sided
>>1-sided
1-sided
Press [OK] to display
>>2-sided
the image.
2-sided
>>1-sided
2-sided
>>2-sided
Book
>>1-sided
Book
>>2-sided
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Copies
Finishing
Top Edge Top
Binding Binding
Left/Right Top
Original
Orientation
Cancel OK
10/5/2006
Copies
Original
Binding Binding
Left/Right Top
Top Edge Top
Original
Orientation
Cancel OK
10/5/2006
1
10:10
1
10:10