Checking The Remaining Amount Of Toner And Paper - Kyocera Mita KM-3050 Advanced Operation Manual

Status / Job Cancel

Checking the Remaining Amount of Toner and Paper

5-16
Check the remaining amount of toner, paper, and staples on the touch
panel.
Use the procedure below to select the interface.
1
Press the Status/Job Cancel key.
2
Press [Paper/
Supplies] to check
the remaining
amount of toner,
paper, and staples.
The items you can check are described below.
Remaining amount of toner
You can check the remaining amount of toner as one of 11 levels from 100
to 0%.
Status of waste toner box
You can check the status of waste toner box.
Paper
You can check the size, orientation, type, and remaining amount of paper
in each paper source.
Others
You can check the status of staples and punch waste box.
Detail
Toner Information Paper
Toner Status Size
Black(K) Ledger
%
Ledger
Waste Toner OK
Letter
Letter
Letter
Printing Jobs Sending Jobs Storing Jobs
Status
ADVANCED OPERATION GUIDE
Others
Type Status Type Status
30% Staple A OK
Plain
30%
Staple B No Staples
Plain
30% Punch waste OK
Plain
30%
Plain
Plain 0%
Device/
Paper/Supplies
Communication
10/5/2006 10:10