Priority Override - Kyocera Mita KM-3050 Advanced Operation Manual

Priority Override

ADVANCED OPERATION GUIDE
Suspends a current job and gives the selected job priority for copying. The
suspended job resumes after Priority Override copying is finished.
NOTE:
The current job that is selected as Priority Override cannot be
suspended.
The procedure for using Priority Override is explained below.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Advanced Setup] and then [Priority Override].
4
Press [On] to select

Priority Override.

5
Press [OK].
6
Press the Start key. The current copy job is suspended and the copy job
selected in Priority Override starts. The suspended job resumes after
Priority Override copying is finished.
Ready to copy.
Priority Override
Give print job top priority and complete it
before returning to other print jobs.
Press [OK] to display
the image.
Add Shortcut
Status
Copying Functions
Copies
Off
On
Cancel OK
10/5/2006
1-55
1
10:10