Orientation Confirmation
ADVANCED OPERATION GUIDE
1
Press the System Menu key.
2
Press [Common Settings] and [Next] of Function Defaults. Press [ ] twice
and [Change] of Repeat Copy.
3
Select the default for
[Off] or [On].
4
Press [OK].
Select whether to display a screen for selecting the orientation of the
originals to be placed on the platen when using the following functions.
(For more information, refer to page 1-10 for Original Orientation.)
•
Duplex
•
Margin/Centering originals
•
Border erase
•
Combine mode
•
Memo mode
•
Page numbering
•
Booklets
•
Stapling (optional feature)
*
If [On] is selected as the Orientation Confirmation setting in the
System Menu, the selection screen for original orientation appears
when you select any of the above functions.
Orientation Confirmation Setting
Use the procedure below to select the default Orientation Confirmation
setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Change] of Orientation Confirmation.
3
Select the default for [Off] or [On].
4
Press [OK].
Common Settings - Repeat Copy
Select the default repeat copy settings.
Off
Status
System Menu
On
Cancel
OK
10/5/2006
10:10
6-37