System Initialization
ADVANCED OPERATION GUIDE
NOTE:
Regardless of whether the PDF upgrade kit is installed, this
option is only displayed if at least 1 GB of memory has been installed.
Use the procedure below to set the Auto Color Detection Level.
1
Press the System Menu key.
2
Press [ ] > [Adjustments/Maintenance] > [Change] of Auto Color
Detection Level.
3
Press one of keys [1] to [5] to set the detection level.
4
Press [OK].
Initialize the hard disk mounted on the machine to return to the default
mode.
Refer to System Initialization on page 6-85 about the initialization
procedures.
Adjustment/Maintenance - Auto Color Correction
Adjust the auto color correction.
Color
1
2
3
Status
System Menu
Monochrome
4
5
Cancel
OK
10/5/2006
10:10
6-69