Copy Settings; Border Erase For Back Page - Kyocera Mita KM-3050 Advanced Operation Manual

Rev-3
Table of Contents

Advertisement

System Menu

Copy Settings

Border Erase for Back Page

6-38
The following settings are available for copying functions.
Border Erase for Back Page ...6-38
Paper Selection ...6-39
Auto Paper Selection ...6-40
Auto % Priority ...6-40
Preset Limit ...6-41
Quick Setup Registration ...6-41
Reserve Next Priority ...6-43
NOTE:
If user login is enabled, you can only change the settings by
logging in with administrator privileges.
Select the Border Erase Method for Back Page of a sheet. The table below
shows the available settings.
Item
Same as Front Page
Do Not Erase
NOTE:
Refer to page 1-27 and page 2-28 for Border Erase.
Use the procedure below to specify the border erase setting for the back
of the page.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Border Erase to Back Page.
Description
Border Erase performed in the same
setting as the front page
No Border Erase performed on the back
page
ADVANCED OPERATION GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-4050Km-5050305040505050

Table of Contents