Adjustment The Maintenance Mode; Adjusting The Dp Magnification - Kyocera Mita DP-100 Service Manual

1-4-3 Adjustment the maintenance mode

(1) Adjusting the DP magnification

Adjust magnification in the auxiliary scanning direction if magnification is incorrect when the DP is used.
U065
(See the service manual
of the copier.)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "070" using the copy exposure
adjustment keys or zoom +/- keys.
Press the start key.
Press the program key and the
machine enters the test copy mode.
Place an original on the DP
and make a test copy.
Is the image correct?
Press the stop/clear key
to exit maintenance mode.
U070
Start
No
Yes
End
Main scanning
direction
Auxiliary
scanning
direction
Original
Figure 1-4-7
Press the start key.
The new setting is stored.
Change the setting.
• For copy example 1, increase
the value using the zoom (+)
key to make the copy image
longer.
• For copy example 2, decrease
the value using the zoom (-)
keys to make the copy image
shorter.
Setting range: –25 – +25
Initial setting: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increase the value makes
the image longer, and decreasing it
make the image shorter.
Copy Copy
example 1 example 2
3HK
1-4-7