Table of Contents
Advertisement
Sharpness
ADVANCED OPERATION GUIDE
Select the sharpness of the image outline.
The table below shows the available settings.
Item
Sharpen
Unsharpen
NOTE:
You cannot specify the sharpness if you selected [Monochrome]
in Color Selection (see page 2-25).
Use the procedure below to set the sharpness when sending scanned
images.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Color/Image] and then [Sharpness].
4
Press [-3] to [+3]
(Unsharpen -
Sharpen) to adjust
the sharpness.
5
Press [OK].
6
Specify the destination, and press the Start key to start sending.
Detail
Emphasize the image outline. Make letters and
lines appear sharper.
Blur the image outline. Can weaken a Moire
effect (grids appearing as wavelike patterns
when scanning printed photos).
Ready to send.
Place original.
Sharpness
Press [OK] to display
Unsharpen
the image.
-3
-2
Add Shortcut
Status
Sending Functions
Destination
Sharpen
-1
0
+1
+2
+3
Cancel
OK
10/5/2006
2-23
1
10:10
Advertisement
Table of Contents
