Table of Contents
Advertisement
Security
System Initialization
8-8
Overwrite all the data stored in the hard disk when disposing of the
machine.
CAUTION:
If you accidentally turn the main power switch off during
initialization, the hard disk might possibly crash or initialization might fail.
NOTE:
If you accidentally turn the main power switch off during
initialization, turn the main power switch on again. Initialization
automatically restarts.
Use the procedure below to initialize the system.
1
Press the System Menu key.
2
Press [ ] and then [Security].
3
If the user authentication screen appears, enter the login user name and
login password, and press [Login].
If the user authentication screen does not appear, go to Step 5.
4
Enter the default security password, 000000.
5
Press [Execute] of
System Initialization.
6
Press [Yes] on the screen to confirm the initialization. Initialization starts.
7
When the screen appears to show initialization is completed, press the
Power key, check that the Power key and memory indicators are OFF,
and turn the main power switch off and then on.
Security
Change
Data Overwrite Method:
System Initialization:
Execute
Status
ADVANCED OPERATION GUIDE
Change
Security Password:
Close
10/5/2006
10:10
Advertisement
Table of Contents
