Table of Contents
Advertisement
System Initialization
ADVANCED OPERATION GUIDE
Initialize the hard disk mounted on the machine to return to the default
mode.
CAUTION:
System initialization will delete Custom Document Boxes,
data stored in Document Box, addresses in the Address Book, user
property, account information, and settings.
NOTE:
This item will not be displayed if the optional Security Kit is
installed. Refer to Security on page 8-1 about the functions added when
the Security Kit is installed and related procedures.
Using KM-Net for Clients allows you to backup addresses in the Address
Book.
Using the FAX Backup Kit (optional) allows you to backup Job accounting
data.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and then [Execute] of System
Initialization.
3
If user login is disabled, the user authentication screen appears. Enter your
login user name and password and then press [Login]. For this, you need
to log in with administrator privileges. The default login user name and
password are both
4
Press [Yes].
5
Once the initialization ends, the message Task is completed. Turn the
main power switch off and on. appears. Turn the main power switch off.
"
"
5050
.
Adjustment/Maintenance
Change
Copy Density Adjustment:
Print Density:
This will be formatted.
Are you sure?
Correcting Black Line:
This process may take some time.
Display Brightness:
Yes
Charger Auto Cleaning:
Status
System Menu
Change
Send/Box Density Adjust.:
Execute
Execute
Change
No
Return to Top
Close
10/5/200 6
10:10
6-85
Advertisement
Table of Contents
