Table of Contents
Advertisement
Drum Refresh
ADVANCED OPERATION GUIDE
If printed images are blurred as if the image has flowed, or if there are blank
white areas or black dots on the image, you can reduce image blurring and
other defects by refreshing the drum.
NOTE:
Drum Refresh cannot be performed while printing. Execute Drum
Refresh after the printing is done.
Use the procedure below to refresh the drum.
1
Place Letter or A4 on the Multi Purpose tray.
2
Press the System Menu key.
3
Press [ ], [Adjustment/Maintenance] and then [Execute] of Drum Refresh.
4
Press [Yes]. Drum
Refresh starts and
ends in about 6
minutes.
5
Once Drum Refresh ends, return to the Adjustment/Maintenance screen.
Adjustment/Maintenance
Drum Refresh 1:
Execute
Auto Drum Refresh:
Change
Standard
Drum Refresh will be started.
Are you sure?
Yes
Status
System Menu
Execute
Drum Refresh 2:
Execute
Main Charger Cleaning:
No
2/2
Return to Top
Close
10/5/2006
10:10
6-65
Advertisement
Table of Contents
