Table of Contents
Advertisement
Charger Auto Cleaning
Display Brightness
ADVANCED OPERATION GUIDE
3
Press [Off],
[On(Low)] or
[On(High)].
4
Press [OK].
If black streaks appear on the printouts or scanned data, perform
automatic cleaning of the main chargers.
If no black line appears at the ends of the paper (margin), refer to
Correcting Fine Black Lines on page 6-66.
The procedure for using Charger Auto Cleaning is explained below.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and [Execute] of Charger Auto
Cleaning.
3
Press [Yes].
Automatic cleaning
of the main charger
starts and ends in
about 45 seconds.
4
Once the cleaning ends, return to the Adjustment/Maintenance screen.
Set the brightness of the touch panel.
Use the procedure below to adjust the display brightness.
1
Press the System Menu key.
Adjustment/Maintenance - Correcting Fine Black Line
Reduce the visibility of fine black lines if they
appear in a scanned image.
*Small characters will also become less visible.
On(Low)
Off
Status
Adjustment/Maintenance
Change
Copy Density Adjustment:
Print Density:
The charger will be cleaned.
Correcting Black Line:
Are you sure?
Display Brightness:
Yes
Charger Auto Cleaning:
Status
System Menu
On(High)
Cancel
OK
10/5/2006
10:10
Change
Send/Box Density Adjust.:
Execute
Execute
Change
No
Return to Top
Close
10/5/200 6
10:10
6-67
Advertisement
Table of Contents
