Table of Contents
Advertisement
Copying Functions
Original Size
1-2
Specify the size of originals being scanned. Be sure to specify the original
size when copying non-standard sizes.
The following options are available.
Item
How to Select
Standard
Have the size of
Sizes 1
original detected
automatically, or
select from the
standard sizes.
Standard
Select from the
Sizes 2
standard sizes
not included in
the Standard
Sizes 1 .
Others
Select from
envelope,
postcard or the
custom sized
originals*.
Size Entry
Enter the size
not included in
the standard
sizes 1 and 2**.
*
For instructions on how to register custom original sizes
(Custom 1 to 4), refer to Custom Original Size Setup on page
6-6.
**
The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 6-17.
Use the procedure below to select the original size.
1
Place the originals on the platen.
2
Press the Copy key.
Sizes
Inch models: Auto, Ledger, Legal,
Letter, Letter-R, Statement,
Statement-R, 8.5×13.5", Oficio II and
11×15"
Metric models: Auto, A3, B4, A4,
A4-R, B5, B5-R, A5, A5-R, B6, B6-R,
A6-R and Folio
Inch models: A3, B4, A4, A4-R, B5,
B5-R, A5, A5-R, B6, B6-R, A6-R,
Folio, 8K, 16K and 16K-R
Metric models: Ledger, Legal, Letter,
Letter-R, Statement, Statement-R,
8.5×13.5", Oficio II, 11×15", 8K, 16K
and 16K-R
Hagaki, Oufuku Hagaki, Custom 1 to
4
Inch models
Horizontal: 2 to 17" (in 0.01"
increments), Vertical: 2 to 11.69" (in
0.01" increments)
Metric models
Horizontal: 50 to 432 mm (in 1 mm
increments), Vertical: 50 to 297 mm
(in 1 mm increments)
ADVANCED OPERATION GUIDE
Advertisement
Table of Contents
