Table of Contents
Advertisement
Sending Functions
File Format
2-14
Select the file format of the image to send.
The table below lists the file formats and their details.
File Format
PDF
TIFF
JPEG
High Comp.
PDF *
*
Only displayed when the optional PDF Upgrade Kit is installed.
NOTE:
In the color mode, when grayscale is selected, [JPEG] is
displayed, and when full color is selected, [JPEG] and [High Comp. PDF]
are displayed.
When the color mode in scanning has been selected for Grayscale or Full
Color, you can adjust the image quality Regarding color mode, refer to
Color / Grayscale / Monochrome Selection on page 2-25.
When the optional PDF upgrade kit has been installed, you can use PDF
encryption functions. For details, refer to the following PDF Encryption
Functions.
Use the procedure below to select the file format for transmission.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Type of Original/Transmission] and then [File Format].
Adjustable range of image
quality
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Compression Ratio Priority
to 3 Quality Priority
ADVANCED OPERATION GUIDE
Color mode
Full Color, Grayscale,
Monochrome
Full Color, Grayscale,
Monochrome
Full Color, Grayscale
Full Color
Advertisement
Table of Contents
