Table of Contents
Advertisement
System Menu
Auto Panel Reset
6-72
If no jobs are run for a certain period of time, automatically reset settings
and return to the default setting.
NOTE:
Refer to page 6-21 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Auto Panel Reset.
3
Press [Off] or [On].
4
Press [OK].
Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait
before Auto Panel Reset. Options are between 5 and 495 seconds (every
five seconds).
NOTE:
If you select [Off] for Auto Panel Reset, the time display does not
appear.
Use the procedure below to set the reset time.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Reset Timer.
Date/Timer - Auto Panel Reset
Automatically reset settings and return to
default screen.
Off
Status
ADVANCED OPERATION GUIDE
On
Cancel
OK
10/5/2006
10:10
Advertisement
Table of Contents
