Color Selection; Color Mode; Full Color; Color Setting - Kyocera Mita KM-3050 Advanced Operation Manual

System Menu
6-24
3
Select the default
resolution.
4
Press [OK].

Color Selection

Select the default scanning color setting. The available default settings are
shown below.

Color mode

Full Color

Grayscale
Monochrome
Use the procedure below to select the default color setting.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of Color Selection.
3
Select the default

color setting.

4
Press [OK].
Common Settings - Scan Resolution
Select default scan resolution.
600x600dpi 400x400dpi 300x300dpi
Ultra Fine
200x100dpi
Normal
Status
Description
Scan document in full color.
Scan document in grayscale for smoother
and finer finish.
Scan document in black and white. File
size is smaller than Full Color or Grayscale.
Common Settings - Color Selection
Select default color.
Full Color Grayscale Monochrome
Status
ADVANCED OPERATION GUIDE
200x400dpi 200x200dpi
Super Fine Fine
Cancel OK
10/5/2006 10:10
Cancel OK
10/5/2006 10:10