Selecting How To Copy Originals - Kyocera Mita KM-3050 Advanced Operation Manual

Selecting How to Copy Originals

ADVANCED OPERATION GUIDE
Select whether you wish to create individual copies on different size papers
matching the original sizes or to produce all copies on the same size
papers.
NOTE:
This function is available regardless of whether originals have the
same width or not.
The table below shows the finished document sizes for the different
original size options.
Option
Mixed Sized
Copies
Same Size Copies
Use the procedure below to copy mixed sized originals.
1
Place originals on the document processor.
IMPORTANT: When placing originals of different widths, be sure to flush
them against the document width guide toward the back of the machine.
2
Press the Copy key.
3
Press [Org./Paper/Finishing] and then [Mixed Sized Originals].
4
Select [Mixed Sized
Copies] or [Same
Size Copies] as
finish size.
5
Select the combination of originals from [Same Width] and [Diff Width].
When [Same Size Copies] is selected, select [Long Edge Left] or [Short
Edge Left] as the first original orientation.
6
Press [OK].
7
Press the Start key to start copying.
Description
Originals are detected individually for size and
copied to the same size papers as originals.
Originals are all copied to the same size papers.
Ready to copy.
Mixed Sized Originals
Off
Mixed Sized
Press [OK] to display
Copies
the image.
Same Sized
Copies
Add Shortcut
Status
Copying Functions
Copies
Original Direction
Same Width Diff Width
Top Page Direction
Long Edge Short Edge
Left Left
Cancel OK
10/5/2006
1
10:10
1-9