Repeat Copy Box - Kyocera Mita KM-3050 Advanced Operation Manual

Using Document Box

Repeat Copy Box

4-28
Setting the Number of Stored Jobs
To maintain free space on the hard disk, you can set the maximum number
of stored jobs.
Use the procedure below.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next] of Job Box, then
[Change] of Repeat Copy Job Retention.
3
Use the [+] and [–]
keys or the numeric
keys to enter the
maximum number of
stored jobs.
You can enter any
number between 0
and 50.
NOTE:
If you enter a value of 0 (zero), no jobs are stored.
4
Press [OK]. The maximum number of stored jobs is set.
5
Press [Return to Top] repeatedly to return to the initial system menu
screen.
Printing a Document
You can print the documents stored in the Repeat Copy box.
Use the procedure below.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Repeat Copy] box, and press [Open].
Document Box/Removable Memory - Quick Copy Job Retention
Set the maximum number of quick copy/proof print jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any quick copy/proof print jobs.
(0 - 50)
30
Status
ADVANCED OPERATION GUIDE
job(s)
Cancel OK
10/5/2006 10:10