Status / Job Cancel
Configuring the Devices
Removing the USB Memory
5-18
Detailed information on controlling devices is given below.
Removable Memory (USB Memory)
•
The usage and capacity of the external media connected to this
machine are displayed.
•
Press [Format] to format external media.
•
Press [Remove] to safely remove the external media. For details, refer
to Removing the USB Memory in the next section.
FAX Port 1, FAX Port 2
•
The information such as sending/receiving and dialing is displayed.
•
Press [Line Off] to cancel a fax in sending/receiving. For details, refer
to Canceling FAX Communication on page 5-19 in the section
afterwards.
•
Press [Manual RX] to start a fax. Use this function when you want to
talk to the sender before receiving the fax originals. For details, refer to
the Operation Guide of FAX kit.
•
Press [Log] to display the fax transmission history. For details, refer to
the Operation Guide of FAX kit.
Format (memory for printer, Compact Flash)
•
The information such as cannot recognize or unconnected and the
usage/capacity of memory card are displayed.
•
Press [Format] to format the memory card.
•
Press [Printing list] to print the partition list. For details, refer to Print of
Partition List.
There is a way to remove the USB memory safely.
Use the procedure below.
1
Press the Status/Job Cancel key.
Detail
Scanner
Ready.
Printer
Ready.
Removable Memory
Safely removable.
Format
Remove
FAX Port 1
Communicating...
Line Off
Manual RX
FAX
Log
Printing Jobs
Sending Jobs
Storing Jobs
Log
Executing TX job **.
ADVANCED OPERATION GUIDE
Hard Disk
Error has occurred.
FAX Backup Memory
Not connected.
Memory Card
Not connected.
Display
Format
Printing list
Error
Device/
Paper/Supplies
Communication
10/5/2006
10:10