Registering Shortcuts (Copying And Sending) - Kyocera Mita KM-3050 Advanced Operation Manual

Registering Shortcuts (Copying and Sending)

Adding Shortcuts
ADVANCED OPERATION GUIDE
Add shortcuts in the Quick Setup screen for easy access to the frequently
used functions. A function name linked to a registered shortcut can be
changed as necessary. You can register shortcuts for up to 5 copying
functions and up to 6 sending functions.
NOTE:
In the default settings, [Interrupt Copy] is registered to the
shortcut key number 01 of the copy function.
Shortcut registration is performed in the setup screen of each function.
Shortcuts can be registered for all functions in which [Add Shortcut]
appears on the screen.
Use the procedure below to register a shortcut.
1
After making the
desired settings in
the setup screen of
each function, press
[Add Shortcut].
2
Press the keys corresponding to the shortcut number (01 to 06) to register.
NOTE:
If you select a shortcut number already registered, the currently
registered shortcut can be replaced with a new one.
3
Enter the shortcut name and press [Register] to add the shortcut. Press
[Close].
Ready to copy.
Page #
None
-1-
Press [OK] to display
the image.
P.1
1/n
Add Shortcut
Status
Copying Functions
Copies
1st Page (1 - 10)
Auto
1
Last Page
Auto
# Keys
Denominator
Start # (1 - 999)
#
1
Top Edge Top
Original
Orientation
# Keys
Cancel OK
10/5/2006
1-61
1
10:10